Tips for using flange planer mainly include the following aspects:
Preparation before operation:
Make sure there is no debris around the planer platform and moving arm, and keep the working area clean.
Check whether the tool has cracks, wear or other abnormal conditions, and replace it if necessary.
Operation steps:
After starting the planer, let the machine run for a few minutes to ensure that the oil pump supplies oil to all parts.
Select the appropriate linear motion speed of the planer according to the material. Generally, stainless steel materials go back and forth more than ten times per minute, and cast iron materials go back and forth more than thirty times per minute.
Adjust the movement distance of the moving arm and adjust the telescopic distance of the arm according to the plane length of the workpiece.
Use the fast tool switch to return to the original position after processing.
Adjustment and maintenance:
Check and clean the tool regularly to ensure that the tool is free of dirt and is flat overall.
Adjust the position of the planer to ensure that the gap between the blades is uniform to ensure processing accuracy.
Start at a low speed during operation, gradually increase to the required speed, and pay attention to the operation of the tool.
Safety precautions:
Before operation, make sure the planer platform is empty and there is no object in front of the moving arm.
Be patient and understand how to use each component and operating lever during operation.
